Floor Edging™

For Dry Basements

FE 8555
Product made with a minimum 94% post industrial recycled plastic Made with a minimum 94% Post-Industrial Recycled Plastic

Floor Edging™ Installation

  • Layout Floor Edging™ overlapping ends approximately 2”
  • Fabricate inside and outside corners with common utility knife
  • Select proper floor elevation with story pole or snap chalk line – Top edge of Floor Edging™ must be a minimum of 2” higher than top edge of concrete
  • Cover floor edging™ and drain field with poly before pouring floor

Ordering & Shipping

Contact MTI at 1-800-879-3348 for specific cost to your destination.

Floor Edging™ Specifications

FE 8555 is a 0.024″ (0.6 mm) thick high-impact polystyrene strip formed with 3/16″ (4.8 mm) deep corrugations, bent into L-shape, 9″ (229 mm) wide by 5″ (127 mm) high, to fit on top of footing and below the edge of a slab on grade. The system forms a control joint between slab and wall and serves as a thermal break between the slab and footing and/or foundation.

Product Number
FE 8555
Piece Length (Feet)
Pieces per Bundle
Linear Feet per Bundle
Bundles per Box
Linear Feet per Box
Boxes per Pallet
Linear Feet per Pallet
Pallet Size

Documents, Specs, Details & More

Vent Mat™

 VM 9025 

Control Cavity™

 CC 4800, CC 4810