Vented MTI Edge Metal™

Vented MTI Edge Metal^TM is superior to most metal termination products on the market. It has large 1” slots placed frequently along the bottom allowing it accommodate both a drainage plane material as well as a WRB and still weep effectively.  Vented MTI Edge Metal^TM can be used with MTI Edge Metal^TM  and Sure Cavity^TM or Gravity Cavity^TM drainage planes to create a roof drainage system beneath shingles.

Features/Benefits

• One of the only metal terminations on the market specifically designed to accommodate a rainscreen drainage plane and “weep”.
• Large 1” slots placed frequently along the bottom provide egress points for moisture to exit thin veneer wall systems.
• For use with veneers without a scratch coat
• Can be used with other MTI products as part of a roof drainage system beneath shingles

• Install below foundation plate line a minimum of 4 inches above the earth
• Run down onto foundation a minimum of 2 inches
• Make sure WRB and Sure Cavity or Gravity Cavity drainage plane go inside Vented MTI Edge Metal
• Vented MTI Edge Metal can also be used as part of a roof drainage system beneath shingles.  See HyperSpecs > Roofs for more information on this installation detail.

Contact MTI at 1-800-879-3348 for specific cost to your destination.

Vented MTI Edge Metal Specifications

VMEM3168 is 26 gauge galvanized steel bent into J channel with a 85° angle. Vertical attachment flange - 3.656" (89 mm), ground - 0.5" (13 mm), bonding slots 1" (25mm) punched 1.75" (44 mm) apart, 8 ft long.