Tuck Point Retrofit Weeps

Tuck Point Retrofit Weeps™

TRW-1425

Questions?
Need a custom detail?
Ready to order?

Tuck Point Retrofit Weeps
  • Tuck Point Retrofit Weeps
  • Tuck Point Retrofit Weeps
  • Tuck Point Retrofit Weeps
  • Tuck Point Retrofit Weeps

Tuck Point Retrofit Weeps Highlights

Tuckpoint Retrofit WeepsTM are superior to other weeps because it creates multiple weep holes allowing water to exit the cavity by running on the top surface of the flashing.  It puts the the weep holes at the lowest point of the wall, beneath the bed joint of mortar!  Tuckpoint Retrofit Weeps™ various length legs allow for its use with wide (deep) veneers such as full stone.

 

Features/Benefits

  • It forms the bottom side of the bed joint of mortar creating 4 weep holes at various spaces
  • Doesn’t impede the flow of water or create artificial dams that impede drainage
  • Installs quickly saving time and money
  • Translucent in color to blend with mortar

Tuck Point Retrofit Weeps Installation

  • Install Tuckpoint Retrofit WeepsTM  10" to 12" on center on flashings
  • Lightly score and crack off Tuckpoint Retrofit Weeps™ while mortar is still plastic

Tuck Point Retrofit Weeps Ordering/Shipping

This is a custom order product. Contact MTI at 1-800-879-3348 for order specifics and shipping cost to your destination.

Tuckpoint Retrofit Weeps Specifications

A 0.024" (0.6 mm) thick high-impact polystyrene strip formed with 3/16" (4.8 mm) deep corrugations. This system is installed under existing masonry wall for a retrofit weep application.

Tuck Point Retrofit Weeps Literature

Product Cutsheet

Top