Head Joint Weep™

Head Joint Weeps^TM are installed as weeps and spacers between each brick on steel lintels and shelf angles.  Head Joint Weeps^TM create tunnels/channels into the cavity of masonry walls at the lowest point of the cavity at the top surface of the flashing that covers the steel lintel and shelf angle.

Features/Benefits

• They create weep tunnels at the lowest point of the cavity
• They are spacers and easy to install
• They save time, thereby saving money

• Place Head Joint Weeps as spacers in each head joint of each brick
• Spread bed joint of mortar on top of first course of brick
• Tuck point mortar into head joint and tool joint
• MTI recommends the installation of drip plate under all flashing over all steel lintels

Contact MTI at 1-800-879-3348 for specific cost to your destination.

Head Joint Weep Specifications

0.24" (0.6 mm) thick acetac 3/8" (9.5 mm) wide x 3/8" (9.5 mm) high and 4.5" (114.3 mm) long. NOTE: Masonry Technology, Inc. recommends the installation of drip plate under all flashing over all steel lintels and shelf angles.