Concealed Steel Lintel / Shelf Angle Weep System™

The Concealed Steel Lintel/Shelf Angle Weep System™ is used with lip brick set in a bed joint of mortar.  It creates a weep system that moves moisture out and away from this sensitive detail.  The Concealed Steel Lintel/Shelf Angle Weep System™ creates tunnel weeps beneath the bed joint of mortar where an effective weep should be – at the lowest point!

Features/Benefits

• It forms the bottom side of the bed joint of mortar and the front nose of the bed joint of mortar
• It creates a weep system when a lip brick set in a bed joint of mortar is used in the first course to conceal a steel lintel or shelf angle

• Place Steel Lintel/Shelf Angle Weep on flashing with the short custom-cut edge protruding downward off the exterior edge of the steel lintel/shelf angle and appropriate drip plate edge
• The back edge of steel lintel/shelf angle custom weep system should be approximately ¼” from the vertical face of the steel lintel/shelf angle and vertical surface of flashing
• Spread bed joint of mortar and install the lip brick units on the first course

Contact MTI at 1-800-879-3348 for specific cost to your destination.

Concealed Steel Lintel/Shelf Angle Weep System Specifications

A 0.024" (0.6 mm) thick high-impact polystyrene strip formed with .135" (3.429 mm) deep corrugations, bent into L-shape, 9" (229 mm), or less, wide by 5" (127 mm), or less, high. This system forms the bottom of the bed joint of mortar and the front nose of the bed joint of mortar to create a weep system when a lip brick is used in the first course to conceal a steel lintel or shelf angle.