Retrofit Brick Ties

Retrofit Brick Ties™ Installation

Interior-Installed Retrofit Brick Tie

RBT 7381

Need a custom detail?
Ready to order?

Retrofit Brick Ties Installation

  • From the interior drill a 2" deep,  3/8" diameter hole in mortar joint next to studs
  • Use compressed air or a brush to clean debris from the hole
  • Fill hole in mortar joint with anchoring epoxy
  • Insert Retrofit Brick Tie into the epoxy and fasten to stud
  • Install Retrofit Brick Ties every 16" vertically on studs