Moisture Diverter™ Installation
Protection Above Doors & Windows
DS 2858
Moisture Diverter Installation
- Position Moisture Diverter above wall openings (window, door, etc.) immediately above, but not in contact with, mounting flanges or flashing systems
- Make Moisture Diverter watertight against moisture resistant coatings on masonry or poured concrete walls
- Install flashing and overlap WRB shingle-fashion on framed wall
- Install Moisture Diverter with 1/4 inch per foot slope-to-drain; Moisture Diverter must extend a minimum of 4 inches past window mounting flange or window trim on both sides of window