Floor Edging™ For Dry Basements
FE8555
What Floor Edging does:
- Forms edge of floor at walls — block or poured.
- Separates edge of floor from walls — prevents attaching, moisture transfer and thermal transfer.
- Forms bottom side of floor.
- Separates bottom side of floor from substrate - prevents attaching, floor shrinkage cracking, and moisture transfer.
- Floor Edging can be used with expansion material.
How to install Floor Edging*
- Fasten Floor Edging™ to wall 2’ on center.
- Top Edge of Floor Edging™ must be a minimum of 2” higher than top edge of concrete floor.
Ordering and Shipping Information
| Piece Length (Feet) | 4
|
| Pieces per Bundle | 10
|
| Linear Feet per Bundle | 40
|
| Bundles per Box | 6
|
| Linear Feet per Box | 240
|
| Boxes per Pallet | 10
|
| Linear Feet per Pallet | 2400 |
Contact MTI at 1-800-879-3348 for specific cost to your destination.
Floor Edging Specifications
0.024" (0.6 mm) thick high-impact polystyrene strip formed with 3/16" (4.8 mm) deep corrugations, bent into L-shape, 9" (229 mm) wide by 5" (127 mm) high, to fit on top of footing and below the edge of a slab on grade. The system forms a control joint between slab and wall and serves as a thermal break between the slab and footing and/or foundation.
Product Cutsheet: Download Product Cut Sheet
Popular
HyperSpecs® Wall Details featuring Floor Edging
Browse Wall Details |
Browse Wall Details with Floor Edging
*The installation listed provides the most common installation instructions. For specific installation details please find your wall detail in our
HyperSpecs library.
