Masonry Technology Logo

EIFS Installed on ICF at Bottom of Wall

Detail #12NA02PW001

Get the Details
Large Detail DrawingCAD Details .DWGCAD Details PDF

Questions? Ready to order?
1-800-879-3348
info@mtidry.com

Updated Nov 30, 2011
EIFS Installed on ICF at Bottom of Wall Mold & Moisture Control

Products Used

Gravity Cavity

GC1816, GC1832
What Gravity Cavity Does
  • Gravity Cavity™ rainscreen drainage plane can be used in most thin veneer wall details. It is appropriate behind a wide variety of veneers including stucco, thin brick, thin stone, full brick, full stone, and most cladded sidings.
  • easy to apply
  • extremely durable and will not crush or crack
  • with cladded sidings, it prevents waviness and nail drive-through
  • made from 96% post-industrial recycled high-impact polystyrene making it very durable and environmentally friendly
  • increases sustainability by eliminating entrapped moisture in the building envelope
  • saves energy by protecting insulation
How to Install Gravity Cavity
  • Gravity Cavity™ is applied over the construction paper/WRB.
  • Position the Gravity Cavity drainage plane with the spunbond polypropylene fabric facing the weather and wrapped under the bottom of the first course of Gravity CavityTM for a bug screen.
  • On the following courses, the fabric skirt should overlap the top of the course directly beneath it. Only the fabric overlaps the course below (the top of the lower corrugated polystyrene sheet abuts the bottom of the upper corrugated polystyrene sheet). Lightly tack/staple the Gravity Cavity as you roll it out. Metal lath and veneer will hold the Gravity Cavity in place.
  • View Product Video above to watch installation process in a Thin Veneer application.
Shipping Information & Product Specifications
Order Now! 1-800-879-3348
Product NumberGC 1816GC 1832
Square Feet per Roll100200
Roll Length (Feet)7676
Roll Width (Inches)15.7531.5
Channel Depth1/8" / 3.25mm1/8" / 3.25mm
Rolls per Box2N/A
Boxes per Pallet20N/A
Rolls per Pallet4032
Square Feet per Pallet40006400
Pallet Size48" x 40" x 77"50" x 50" x 77"

Gravity Cavity Specifications
Made of Recycleable Materials

0.024"(0.6mm) thick, high impact polystyrene sheets. They are formed with corrugations and a spunbond polypropylene fabric on one side with a 4" (102mm) skirt on one edge. Master Format: 04-05-23.19; 07-05-00 CSI: 04090, 04050, 07050, 07100, 07260.

Product Cutsheet: Download Product Cut Sheet | Download MSDS

Google SketchUp 3D Model: Download Product Model from 3D Warehouse


L+R Weep Screed

LR3501
What L+R Weep Screed Does
  • It is the only metal termination on the market that is specifically designed to accommodate a rain screen drainage plane material and "weep."
  • Forms the bottom edge of the scratch coat and the bottom edge of the thin-set mortar.
  • Large 1" slots, placed frequently along bottom edge provide favorable egress points for moisture to exit thin veneer wall system.
How to Install L+R Weep Screed
  • Install below foundation plate line - a minimum of four inches above the earth.
  • Make sure WRB, Sure Cavity, metal lath, and scratch coat all go inside the L+R Weep Screed.
Shipping Information & Product Specifications
Order Now! 1-800-879-3348
Product Number LR 3501
Piece Length (Feet) 8
Units per Tube 20
Linear Feet per Tube160

L+R Weep Screed Specifications
Made of Recycleable Materials

26 gauge galvanized steel bent into 70° V shape. Vertical attachment flange - 3.5" (89 mm), ground - 0.5" (13 mm), bonding slots 1" (25 mm) punched 1.75" (44 mm) apart, 8 ft long.

Product Cutsheet: Download Product Cut Sheet

Google SketchUp 3D Model: Download Product Model from 3D Warehouse